mplab icd2 & jdm & pickit2 pic programmer & development board & debugger

HOME ABOUT US PRODUCTS CONTACT Forum

笢恅

M07---USB+RS232 COM Serial PORT ICD2 PIC In-circuit Debugger and Programmer
+

Universal Programming Module
+
Development Board

Summary
An all-in-one debugger/programmer solution: MPLAB® ICD 2 is a low cost, real-time debugger and programmer for selected PIC® MCUs and dsPIC® DSCs. Using Microchip Technology's proprietary In-Circuit Debug functions, programs can be downloaded, executed in real time and examined in detail with the debug functions of MPLAB. Set watch variables and breakpoints from symbolic labels in C or assembly source code, and single step through C source lines or into assembly code. MPLAB ICD 2 can also be used as a development programmer for supported MCUs.

The secret behind In Circuit Debugging is two dedicated hardware lines (microcontroller pins used only during debugging mode) that control In Circuit Serial Programming™ (ICSP™) of the device and, afterwards, debugging through proprietary, on-chip firmware. The ICD 2 debug features are built into the microcontroller and activated by programming the debug code into the target processor. There is some shared overhead expense that includes one stack level, some general purpose file registers and a small area of program memory when in the debug mode.
IMPORTANT NOTE: MPLAB ICD 2 requires minimal design guidelines be followed to ensure stable communications between the unit and the target.

PIC Microchip USB MPLAB ICD2 ICD2.5 KITS KIT Development Board
Product Appearance


ICD2 Internal PCB board

Description:

            

New design Enhanced  USB ICD2 PIC debugger and programmer for Microchip's
PIC and dsPIC digital signal controllers. Using the powerful user interface of the MPLAB IDE 
(Intergrated Development Environment).

 USB ICD2 In-circuit Debugger and Programmer:

  • USB (Full Speed 2 M bits/s) & RS-232 interface to host PC
  • Real time background debugging
  • MPLAB IDE GUI (free copy included)
  • Built in over-voltage/short circuit monitor
  • Firmware upgradeable from PC
  • Totally enclosed
  • Supports low voltage to 2.0 volts. (2.0 to 6.0 range)
  • Diagnostic LEDs (Power, Busy, Error)
  • Reading/Writing memory space and EEDATA areas of target microcontroller
  • Programs configuration bits
  • Erase of program memory space with verification
  • Peripheral freeze-on-halt stops timers at breakpoints
  • Built-in USB Reset self-reconnected function.
  • High reliably ICs and Components.
  • Compact design with mounting hole.
  • Increased overcurrent protection
  • Increased electrostatic protection
  • Increased User Board first opened power protection
  • Increased Users Board Overvoltage Protection

The MPLAB ICD 2 connects using USB or RS-232 between the design engineer's PC operating with MPLAB IDE and their product board (target) being developed. It acts as an intelligent interface/translator between the two, allowing the engineer to look into the active target board's microcontroller, viewing variables and registers at breakpoints with MPLAB watch windows. A breakpoint can be set to halt the program at a specific location. The program can be single-stepped or run at full speed. At breakpoints, data and program memory can be read and modified. Additionally, the MPLAB ICD 2 can be used to program or reprogram the Flash-based microcontroller while installed on the board.

Universal Programming Module(free):

  1. This is an easy to use Universal Programming Module for ICD2,MCD2,ICD2.5
  2. Using a clamp for the SOIC
Support socket :SOT23-6(PIC10FXXX)  SO-8  SO-14  SO-18  SO-28  TQFP44  PQFP44  PLCC44 TQFP64 DIP40
  3. VPP can choose before VDD, ICD2 support internal oscillations  and internal reset chip's repeated programming
  4. We have to you DuPont lines for programming different chips (red DuPont lines*4,black DuPont lines*4,purple DuPont lines*1, yellow DuPont lines*1,white DuPont  lines*1)
  5. Have ICSP OUT interface, convenient to other target's internal oscillation and internal reset chip programming
  6. 40-Pin 3M ZIF socket. ZIF on programmable chip package: DIP8, DIP14, DIP18, DIP20, DIP28, DIP40
Devices Support Details (MPLAB IDE 7.62 version):

ICD2 Debugger - Support

PIC10FXXX:
PIC10F200* PIC10F202* PIC10F204* PIC10F206* PIC10F220*
PIC10F222*
PIC12XX:
PIC12F508* PIC12F509* PIC12F510* PIC12F609* PIC12F615*
PIC12F629* PIC12F635* PIC12F675* PIC12F683* PIC12HV609*
PIC12HV615*
PIC16XX:
PIC16F505* PIC16F506* PIC16F610* PIC16F616* PIC16F627A*
PIC16F628A* PIC16F630* PIC16F631* PIC16F636* PIC16F639*
PIC16F648A* PIC16F676* PIC16F677* PIC16F684* PIC16F685*
PIC16F687* PIC16F688* PIC16F689* PIC16F690* PIC16F716*
PIC16F737 PIC16F747 PIC16F767 PIC16F777 PIC16F785*
PIC16F818 PIC16F819 PIC16F87 PIC16F870 PIC16F871
PIC16F872 PIC16F873(A) PIC16F874(A) PIC16F876(A) PIC16F877(A)
PIC16F88 PIC16F882 PIC16F883 PIC16F884 PIC16F886
PIC16F887 PIC16F913 PIC16F914 PIC16F916 PIC16F917
PIC16F946 PIC16HV610*# PIC16HV616* PIC16HV785*
PIC18CXX:
PIC18C601 PIC18C801
PIC18FXX:
PIC18F1220 PIC18F1230 PIC18F1320 PIC18F1330 PIC18F2220
PIC18F2221 PIC18F2320 PIC18F2321 PIC18F2331 PIC18F2410
PIC18F242 PIC18F2420 PIC18F2423 PIC18F2431 PIC18F2439
PIC18F2450 PIC18F2455 PIC18F2458 PIC18F248 PIC18F2480
PIC18F24J10 PIC18F24K20# PIC18F2510 PIC18F2515 PIC18F252
PIC18F2520 PIC18F2523 PIC18F2525 PIC18F2539 PIC18F2550
PIC18F2553 PIC18F258 PIC18F2580 PIC18F2585 PIC18F25J10
PIC18F25K20# PIC18F2610 PIC18F2620 PIC18F2680 PIC18F2682
PIC18F2685 PIC18F4220 PIC18F4221 PIC18F4320 PIC18F4321
PIC18F4331 PIC18F4410 PIC18F442 PIC18F4420 PIC18F4423
PIC18F4431 PIC18F4439 PIC18F4450 PIC18F4455 PIC18F4458
PIC18F448 PIC18F4480 PIC18F44J10 PIC18F44K20# PIC18F4510
PIC18F4515 PIC18F452 PIC18F4520 PIC18F4523# PIC18F4525
PIC18F4539 PIC18F4550 PIC18F4553 PIC18F458 PIC18F4580
PIC18F4585 PIC18F45J10 PIC18F45K20# PIC18F4610 PIC18F4620
PIC18F4680 PIC18F4682 PIC18F4685 PIC18F46K20# PIC18F6310
PIC18F6390 PIC18F63J11 PIC18F63J90 PIC18F6410 PIC18F6490
PIC18F6493# PIC18F64J11 PIC18F64J90 PIC18F6520 PIC18F6525
PIC18F6527PIC18F6585 PIC18F65J10 PIC18F65J11 PIC18F65J15
PIC18F65J50 PIC18F65J90 PIC18F6620 PIC18F6621 PIC18F6622
PIC18F6627 PIC18F6628 PIC18F6680 PIC18F66J10 PIC18F66J11
PIC18F66J15 PIC18F66J16 PIC18F66J50 PIC18F66J55 PIC18F66J60
PIC18F66J65 PIC18F6720 PIC18F6722 PIC18F6723 PIC18F67J10
PIC18F67J11 PIC18F67J50 PIC18F67J60 PIC18F8310 PIC18F8390
PIC18F83J11 PIC18F83J90 PIC18F8410 PIC18F8490 PIC18F8493#
PIC18F84J11PIC18F84J90 PIC18F8520 PIC18F8525 PIC18F8527
PIC18F8585 PIC18F85J10 PIC18F85J11 PIC18F85J15 PIC18F85J50
PIC18F85J90 PIC18F8620 PIC18F8621 PIC18F8622 PIC18F8627
PIC18F8628 PIC18F8680 PIC18F86J10 PIC18F86J11 PIC18F86J15
PIC18F86J16 PIC18F86J50 PIC18F86J55 PIC18F86J60 PIC18F86J65
PIC18F8720 PIC18F8722 PIC18F8723 PIC18F87J10 PIC18F87J11
PIC18F87J50 PIC18F87J60 PIC18F96J60 PIC18F96J65 PIC18F97J60
PIC18LF24J10 PIC18LF25J10 PIC18LF44J10 PIC18LF45J10
PIC24XXXX:
PIC24FJ16GA002* PIC24FJ16GA004* PIC24FJ32GA002* PIC24FJ32GA004* PIC24FJ48GA002*
PIC24FJ48GA004* PIC24FJ64GA002* PIC24FJ64GA004* PIC24FJ128GA006* PIC24FJ128GA008*
PIC24FJ128GA010* PIC24FJ64GA006* PIC24FJ64GA008* PIC24FJ64GA010* PIC24FJ96GA006*
PIC24FJ96GA008* PIC24FJ96GA010* PIC24HJ128GP206* PIC24HJ128GP210* PIC24HJ128GP306*
PIC24HJ128GP310*PIC24HJ128GP506* PIC24HJ128GP510* PIC24HJ256GP206* PIC24HJ256GP210*
PIC24HJ256GP610* PIC24HJ64GP206* PIC24HJ64GP210* PIC24HJ64GP506* PIC24HJ64GP510*
PIC24HJ12GP201*  PIC24HJ12GP202* PIC24HJ16GP304#*  PIC24HJ32GP202#* PIC24HJ32GP204#*
dsPIC30FXX:
dsPIC30F1010# dsPIC30F2010 dsPIC30F2011 dsPIC30F2012 dsPIC30F2020
dsPIC30F2023 dsPIC30F3010 dsPIC30F3011 dsPIC30F3012 dsPIC30F3013
dsPIC30F3014 dsPIC30F4011 dsPIC30F4012 dsPIC30F4013 dsPIC30F5011
dsPIC30F5013 dsPIC30F5015 dsPIC30F5016 dsPIC30F6010 dsPIC30F6010A
dsPIC30F6011 dsPIC30F6011A dsPIC30F6012 dsPIC30F6012A dsPIC30F6013
dsPIC30F6013A dsPIC30F6014 dsPIC30F6014A dsPIC30F6015
dsPIC33FXX:
dsPIC33FJ128GP206 dsPIC33FJ128GP306 dsPIC33FJ128GP310 dsPIC33FJ128GP706 dsPIC33FJ128GP708
dsPIC33FJ128GP710 dsPIC33FJ128MC506 dsPIC33FJ128MC510 dsPIC33FJ128MC706 dsPIC33FJ128MC708
dsPIC33FJ128MC710 dsPIC33FJ12GP202 dsPIC33FJ12MC201 dsPIC33FJ12MC202 dsPIC33FJ16GP304
dsPIC33FJ16MC304 dsPIC33FJ256GP506 dsPIC33FJ256GP510 dsPIC33FJ256GP710 dsPIC33FJ256MC510
dsPIC33FJ256MC710dsPIC33FJ32GP202 dsPIC33FJ32GP204 dsPIC33FJ32MC202 dsPIC33FJ32MC204
dsPIC33FJ64GP306 dsPIC33FJ64GP206 dsPIC33FJ64GP310 dsPIC33FJ64GP706 dsPIC33FJ64GP708
dsPIC33FJ64GP710 dsPIC33FJ64MC506 dsPIC33FJ64MC508 dsPIC33FJ64MC510 dsPIC33FJ64MC706
dsPIC33FJ64MC710
"*"  Devices Debugging needs Header Interface
"
#"  Devices with preliminary support

ICD2 Programmer- Support

PIC10FXXX:
PIC10F200 PIC10F202 PIC10F204 PIC10F206 PIC10F220
PIC10F222
PIC12XX:
PIC12F508 PIC12F509 PIC12F510 PIC12F629 PIC12F615
PIC12F635 PIC12F675 PIC12F683 PIC12HV609 PIC12HV615
PIC16XX:
PIC16F505 PIC16F506 PIC16F54 PIC16F57 PIC16F59
PIC16F610 PIC16F616 PIC16F627 PIC16F627A PIC16F628
PIC16F628A PIC16F630 PIC16F631 PIC16F636 PIC16F639
PIC16F648A PIC16F676 PIC16F677 PIC16F684 PIC16F685
PIC16F687 PIC16F688 PIC16F689 PIC16F690 PIC16F716
PIC16F72 PIC16F73 PIC16F74 PIC16F76 PIC16F77
PIC16F737 PIC16F747 PIC16F767 PIC16F777 PIC16F785
PIC16F818 PIC16F819 PIC16F84A PIC16F87 PIC16F870
PIC16F871 PIC16F872 PIC16F873ㄗAㄘ PIC16F874ㄗA) PIC16F876ㄗA)
PIC16F877ㄗAㄘ PIC16F88 PIC16F913 PIC16F914 PIC16F916
PIC16F917 PIC16F946 PIC16F882 PIC16F883 PIC16F884
PIC16F886 PIC16F887 PIC16HV610 PIC16HV616 PIC16HV785
rfPIC12F675F* rfPIC12F675H* rfPIC12F675K*
PIC18CXX:
PIC18C601 PIC18C801
PIC18FXX:
PIC18F1220 PIC18F1230 PIC18F1320 PIC18F1330 PIC18F2220
PIC18F2221 PIC18F2320 PIC18F2321 PIC18F2331 PIC18F2410
PIC18F242 PIC18F2420 PIC18F2423 PIC18F2431 PIC18F2439
PIC18F2450 PIC18F2455 PIC18F2458 PIC18F248 PIC18F2480
PIC18F24J10 PIC18F24K20* PIC18F2510 PIC18F2515 PIC18F252
PIC18F2520 PIC18F2523 PIC18F2525 PIC18F2539 PIC18F2550
PIC18F2553 PIC18F258 PIC18F2580 PIC18F2585 PIC18F25J10
PIC18F25K20* PIC18F2610 PIC18F2620 PIC18F2680 PIC18F2682
PIC18F2685 PIC18F4220 PIC18F4221 PIC18F4320 PIC18F4321
PIC18F4331 PIC18F4410 PIC18F442 PIC18F4420 PIC18F4423
PIC18F4431 PIC18F4439 PIC18F4450 PIC18F4455 PIC18F4458
PIC18F448 PIC18F4480 PIC18F44J10 PIC18F44K20* PIC18F4510
PIC18F4515 PIC18F452 PIC18F4520 PIC18F4523* PIC18F4525
PIC18F4539 PIC18F4550 PIC18F4553 PIC18F458 PIC18F4580
PIC18F4585 PIC18F45J10 PIC18F45K20* PIC18F4610 PIC18F4620
PIC18F4680 PIC18F4682 PIC18F4685 PIC18F46K20* PIC18F6310
PIC18F6390 PIC18F63J11 PIC18F63J90 PIC18F6410 PIC18F6490
PIC18F6493* PIC18F64J11 PIC18F64J90 PIC18F6520 PIC18F6525
PIC18F6527 PIC18F6585 PIC18F65J10 PIC18F65J11 PIC18F65J15
PIC18F65J50 PIC18F65J90 PIC18F6620 PIC18F6621 PIC18F6622
PIC18F6627 PIC18F6628 PIC18F6680 PIC18F66J10 PIC18F66J11
PIC18F66J15 PIC18F66J16 PIC18F66J50 PIC18F66J55 PIC18F66J60
PIC18F66J65 PIC18F6720 PIC18F6722 PIC18F6723 PIC18F67J10
PIC18F67J11 PIC18F67J50 PIC18F67J60 PIC18F8310 PIC18F8390
PIC18F83J11 PIC18F83J90 PIC18F8410 PIC18F8490 PIC18F8493*
PIC18F84J11 PIC18F84J90 PIC18F8520 PIC18F8525 PIC18F8527
PIC18F8585 PIC18F85J10 PIC18F85J11 PIC18F85J15 PIC18F85J50
PIC18F85J90 PIC18F8620 PIC18F8621 PIC18F8622 PIC18F8627
PIC18F8628 PIC18F8680 PIC18F86J10 PIC18F86J11 PIC18F86J15
PIC18F86J16 PIC18F86J50 PIC18F86J55 PIC18F86J60 PIC18F86J65
PIC18F8720 PIC18F8722 PIC18F8723 PIC18F87J10 PIC18F87J11
PIC18F87J50 PIC18F87J60 PIC18F96J60 PIC18F96J65 PIC18F97J60
PIC18LF24J10 PIC18LF25J10 PIC18LF44J10 PIC18LF45J10
PIC24XXXX:
PIC24FJ16GA002 PIC24FJ16GA004 PIC24FJ32GA002 PIC24FJ32GA004 PIC24FJ48GA002
PIC24FJ48GA004 PIC24FJ64GA002 PIC24FJ64GA004 PIC24FJ128GA006 PIC24FJ128GA008
PIC24FJ128GA010 PIC24FJ64GA006 PIC24FJ64GA008 PIC24FJ64GA010 PIC24FJ96GA006
PIC24FJ96GA008 PIC24FJ96GA010 PIC24HJ128GP206 PIC24HJ128GP210 PIC24HJ128GP306
PIC24HJ128GP310 PIC24HJ128GP506 PIC24HJ128GP510 PIC24HJ256GP206 PIC24HJ256GP210
PIC24HJ256GP610 PIC24HJ64GP206 PIC24HJ64GP210 PIC24HJ64GP506 PIC24HJ64GP510
PIC24HJ12GP201 PIC24HJ12GP202 PIC24HJ16GP304* PIC24HJ32GP202 PIC24HJ32GP204*
dsPIC30FXX:
dsPIC30F1010* dsPIC30F2010 dsPIC30F2011 dsPIC30F2012 dsPIC30F2020
dsPIC30F2023 dsPIC30F3010 dsPIC30F3011 dsPIC30F3012 dsPIC30F3013
dsPIC30F3014 dsPIC30F4011 dsPIC30F4012 dsPIC30F4013 dsPIC30F5011
dsPIC30F5013 dsPIC30F5015 dsPIC30F5016 dsPIC30F6010 dsPIC30F6010A
dsPIC30F6011 dsPIC30F6011A dsPIC30F6012 dsPIC30F6012A dsPIC30F6013
dsPIC30F6013A dsPIC30F6014 dsPIC30F6014A dsPIC30F6015
dsPIC33FXX:
dsPIC33FJ128GP206 dsPIC33FJ128GP306 dsPIC33FJ128GP310 dsPIC33FJ128GP706 dsPIC33FJ128GP708
dsPIC33FJ128GP710 dsPIC33FJ128MC506 dsPIC33FJ128MC510 dsPIC33FJ128MC706 dsPIC33FJ128MC708
dsPIC33FJ128MC710 dsPIC33FJ12GP202 dsPIC33FJ12MC201 dsPIC33FJ12MC202 dsPIC33FJ16GP304
dsPIC33FJ16MC304 dsPIC33FJ256GP506 dsPIC33FJ256GP510 dsPIC33FJ256GP710 dsPIC33FJ256MC510
dsPIC33FJ256MC710 dsPIC33FJ32GP202 dsPIC33FJ32GP204 dsPIC33FJ32MC202 dsPIC33FJ32MC204
dsPIC33FJ64GP306 dsPIC33FJ64GP206 dsPIC33FJ64GP310 dsPIC33FJ64GP706 dsPIC33FJ64GP708
dsPIC33FJ64GP710 dsPIC33FJ64MC506 dsPIC33FJ64MC508 dsPIC33FJ64MC510 dsPIC33FJ64MC706
dsPIC33FJ64MC710
"*" Devices with preliminary support  
PIC 16F87X Microcontroller Development Board 2 ( Brand new )

The development board can be used for all PIC16XX/PIC18XX 28PIN or 40PIN PIN devices (except 16 F59)



Ideal for the Student or Hobbyist to start developing and testing your PIC projects with this multi-featured and flexiable PIC Development board.

  • PIC 16F87X  Development board 2 consists of : 
  • 8 indicator LEDS
  • ICD2 Header connector for programming / Debugging with Microchips ICD2
  • 16x2 LCD Character display
  • 6 Seven segment display
  • RS232 Serial communication port
  • 16 button matrix Keypad
  • Stepp motor slot
  • 4 push buttons
  • Infrared reception
  • DB9 connector and RS232 Transeiver (for serial Comms)
  • I2C Serial EEprom 24c01B - dipswitch used for write enable and setting device address (on supported eeproms)
  • 2 pin sockect for main Osc (4MHz resonator -Default) allows for easy changing of the main Osc frequency.  Provion for loading caps if using a crystal.
  • Buzzer
  • Reset switch
  • Uncommited PIC I/O ports - So the PIC's I/O lines may be connected to any of the onboard modules or external circuits
  • onboard power regulator (accepts 9 - 12v AC/DC supply)

4*4 Matrix keyboard 每 to test password lock and other items. Buzzer voice/PWM output experiment 每 to practice normal voice, music and PWM output sound.

5-way independent key-press每for easy various key-press input experiments.

RS232 serial communication 每 to realize the communication between SCM and computer.

Infrared remote-control receiver 每 to practice infrared remote-control decoding and all kinds of infrared remote control.

All I / O output to facilitate expansion IIC (I2C) communication 每 to read/write 24CXX series chips with hardware IIC or software IIC directly. SPI communication每to read/write EEPROM of 93CXX with hardware SPI or software analog SPI,to select 8-bit or 16-bit read/write method through jumper.

Clock selection 每 jumper for switch between various oscillation modes, to replace crystal vibration of different frequency as required by development of product.

DS18B20 digital temperature sensor 每 1-wire bus communication, wide range for temperature measurement, high accuracy and sensitivity (remark: chip DS18B20 is optional). Stepper motor driver circuit(remark: Setpper motor is optional). Simulation debugging interface 每 to directly connect ICD1/ICD2/MCD1/MCD2 and carry out on-line simulation for on-board chips and resources

On-board power module 每 can connect to the polarity of external AC or DC power supply optionally, voltage range 7-12V mcu/mpu reset key 1-way A/D converter signal input. 8-way independent LED

12864-character LCD每128*64 lattices.(remark:12864- character LCD is optional).

1602-character LCD每internal 5*7 lattices, to display 16*2-character. 6-bit 7-segment digital tube 每 to realize dynamic or static display experiment of digital tube, to display clock,temperature or to make counter.
The auction includes

  1. PIC 16F87X Microcontroller Development Board 2 
  2. USB  & RS-232 PIC ICD2 In-circuit Debugger and Programmer.(PIC16-MCD2)
  3. USB cable
  4. serial cable
  5. Universal Programming Module.
  6. 1 x 6-Pin Individual ICSP Cable.
  7. 1 x RJ12 Connection Cable.
  8. 16F877A Chip
  9. 1602 LCD  
  10. CD-ROM (icd2 soft, Development PCB Layout,Development Board Schematic,Sample code (C / ASM) for each onboard module, MPLAB 7.50 .)
  11. Power supply(110-240 AC TO 9V DC)

Sample with C and ASM Program sources code as below (using pic16f877a):

  • DS1820
  • Buzzer
  • 128x64 GLCD (See the following Photos)
  • 1602 LCD (See the following Photos)
  • 93C46
  • 24C02
  • 4x4 Key testing
  • 8x LED
  • 7x segment
  • ADC
  • Infrared Remote
  • stepp motor

Optional parts:

  • DS18B20 ( DS1820 ) Temperature Sensor(TO-92 package)  - US$3.00 for each
  • 12864-character liquid crystal module    - US$14.00 for each
  • Stepper Motor - US$5.00 for each
  • Dupont wire expansion connection 10pcs rad +10pcs black(30cm long)  - US$2.00 for each
  • PIC16F873A(DIP28)- US$4.00 for each
  • PIC16F876A(DIP28) - US$4.20 for each
  • PIC16F877A(DIP40)- US$4.50 for each
  • PIC18F452(DIP40)- US$6.00 for each

Weight : 1300g
Package Size: 290mm*220mm*80mm

Price: US $129.99
Worldwide shipping by DHL/UPS/TNT/FedEx/EMS...  Express---- US $40.00 (about 3-7 days)

  Purchasing Instructions:
  At the time of purchase, please indicate the following:
  Contact telephone number for shipping purposes

FAQ
Hi, if we buy now, when you shipped to me ?
  • When we received you payment, we will sent the items to you within 1-2 work days !
you sent the items to me ,you have the tracking number for me ?
  • We will send you by DHL/UPS/FedEX/TNT/EMS..Express, This is  have provide Tracking number! and it can takes  3-7 working days !
If the item in the swap in the transport stolen, and you will be re-distributed to us?
  • If you buy the parts, within the prescribed time did not receive goods, we will re-sent to you.
  • For example,  if you buy the parts on jaunary 1, you will received the parts on Jaunary 15 before, becuase it takes 3-7 working days, if you not received the parts on Jaunary 15 before, please tell me we, we will re-sent to you!
  • We WON'T resend any bounce back order due to incorrect shipping address
payment method
  • Accept paypal
    Credit card through Paypal
  • Accept Pay to bank of chian
  • Accept wester union
    I will ship to the shown address on you PAYPAL Payment notice.
    Please confirm your shipping address in the PayPal Account
    or Please tell me your shipping address by Email,
    Please tell me you phone number
    Buyers need to absorb ALL re-shipments fee of returned packages
Return Policy
  • 100% money back guarantee or exchange the same class of the products.
    Full refund will be issued upon receipt of the Deffective Item.
    Please be advised that shipping and handling cost are not refundable.
    Buyers must be returned the defective products within 7 days from the date when product received.
    Refund or Replacement will be sent after we received your returning item.
    In all cases, buyers pay shipping at their own cost to return products for exchange or refund.
Shipping Schedule
  • Normally, Your order will be shipped within 1-2 our business days after the payment is cleared.
    The shipping time may vary, depends on receiver's location.
Item Declare
  • Your item will mark as Gift or Sample and a low's value.
    We are NOT responsible for any import tax, customs fees or customs delay.
    Buyer cannot request to cancel the auction or request for refund under this situation. Please check with your local tax authorities BEFORE bidding.
    However, most of our items can reach to buyers without any taxes.


Payment methods 1: Direct remittance to PAYPAL
 

USB ICD2(MCD2) Debugger & Programmer and Development board+shipping= US $169.99   
Increase DS18B20 ( DS1820 ) Temperature Sensor(TO-92 package)   Increase US$3.00   
Increase 12864-character LCD Module Yellow Backlight    Increase US$14.00   
Increase Stepper Motor    Increase US$5.00   
Increase Dupont wire expansion connection 10pcs rad +10pcs black(30cm long) Increase US$2.00   
Increase PIC16F873A(DIP28) Increase US$4.00   
Increase PIC16F876A(DIP28) Increase US$4.20   
Increase PIC16F877A(DIP40) Increase US$4.50   
Increase PIC18F452(DIP40) Increase US$6.00   

Method 2:You can go directly to our EBAY purchased online stores, and its Web site is: http://stores.ebay.com/QLS-Microchip-pic-mcu-mpu-tools

Method 3: BANK OF CHINA International Business:

Remittance form:Remittance to our BANK OF CHINA account use U.S.dollars through local banks.
Remittances cost:General remittances will be fixed at 25 dollars deducted, the total amount of remittances:The total amount of products + Shipping+ USD $25.00.
The message witch provide to the local bank's:(To avoid making mistakes,You can put the following message to the bank staff,and ask he fill the forms for you )
A/C NO: 4766938-0188-129144-0      IN A/C WITH: TANG YAN 
BENE&S BANK: BANK OF CHINA SHENZHEN BEI FANG BUILDING SUB-BRANCH
SWIFT CODE: BKCHCNBJ45A      ADD: 1/F,BEI FANG BUILDING,SHEN NAN ZHONG ROAD,SHENZHEN,CHINA 
POST CODE: 518033
E-MAIL: cxqmcu@tom.com cxqmcu@cxqmcu.com   MSN: cxqmcu@tom.com
Method 4:  Wester Union
You can select the nearest agency for westernunion, you only need my name, city and country to send money. They accept cash and online payment .After you send it, the workers of westernunion will give you a control number, i need this control number and your full name to draw money.

With more than 150 years of experience, Western Union is a global leader in money transfer services. It helps consumers and businesses send money quickly and reliably,only take 5 minutes to arrive.you can visit www.westernunion.com for more details.Also it is easy to find a close agent from this link: http://www.westernunion.com/info/selectCountry.asp and please click Find An Agent .

Here is my westernunion info:
firstname:   Yan
familyname:   Tang
Address:   Huiningge 13G,qianlong garden,Longhua,ShenZhen,Guangdong,China
city:   ShenZhen
State:   Guangdong
country:   China


Note:
After payment,please e-mail us The Sender's First Name, Last Name, Total Amount, Money Control Transfer Number and address on the payment sheet, so that we can track and get the payment.

SHEN ZHEN QLS ELECTRONIC TECHNOLOGY CO.,LTD.

ADD:Huiningge 13G,qianlong garden,Longhua,SHENZHEN,GUANGDONG P.R.CHINA
Postalcode: 518131  TEL:0755-28187975    FAX:0755-28187976
E-Mail: cxqmcu@cxqmcu.com