mplab icd2 & jdm & pickit2 pic programmer & development board & debugger

HOME ABOUT US PRODUCTS CONTACT Forum

笢恅

Years of development experiences Months of hard design work
                          QLdsPIC3----PIC 16bit Microcontroller Development Board
                                                       Demo board for PIC Microcontroller with the highest cost performance


  The QLdsPIC3 development board is an experimental development board designed by QLS Electronic by integrating its main characteristic function module based on variety of 16-bit microcontroller DEMO boards home and aboard, the main circuit of which origins from the standard DEMO board and reference application circuit of MICROCHIP Co. The design of board resource is completely open which can be flexibly extended, is a good assistant for mass of engineers to deal with the 16-bit MICROCHIP microcontroller software and hardware design.  

  The QLdsPIC3 development board supports PIC24FJ96GA008 and other chips compatible with pin, and the chip module can be changed.
  The QLdsPIC3 development board supports dsPIC30F6014A and other chips compatible with pin, and the chip module can be changed.
  The QLdsPIC3 development board supports dsPIC33FJ128GP708 and other chips compatible with pin, and the chip module can be changed.
On-board resourcesㄩ
  RS-485 and RS-422
communication module
6-pin terminal block and configuration jumper
 (use DuPont wire can be connected to the arbitrary I/O port)
  Ethernet module每 by Microchip's ENC28J60, 10BASE-T stand alone Ethernet Controller.(use DuPont wire can be connected to the arbitrary I/O port)
Si3000 Voiceband Codec with MIC In/Speaker Jacks  每 Jumper for selection of Si3000 Codec mode (Master/Slave) (use DuPont wire can be connected to the arbitrary I/O port)
MMC\SD card slot - For MMC\SD memory cards. Used for data acquisition.(use DuPont wire can be connected to the arbitrary I/O port)(remark: MMC\SD card is optional).
  Power module Separate on-board +5V and +3.3V regulators for VDD and AVDD with direct input from 9V, AC/DC wall adapter, 9V DC power source input jack for development, LED power-on indicator
Real Time Clock by PCF8583 with battery supply.(use DuPont wire can be connected to the arbitrary I/O port)
  RS-232 communication A(Include RTS/CTS) for connection with a PC or any other device with a DB9 connector.
(use DuPont wire can be connected to the arbitrary I/O port)
RS-232 communication B for connection with a PC or any other device with a DB9 connector.
(use DuPont wire can be connected to the arbitrary I/O port)
  Single CAN communication channel  by MCP2551
 (use DuPont wire can be connected to the arbitrary I/O port)
  3xPotentionmeters for simulating analog voltage input..(use DuPont wire can be connected to the arbitrary I/O port)
  8-buttons are provided每for easy various key-press input experiments and jumper setup for pull-up or pull-down of port hardware.(use DuPont wire can be connected to the arbitrary I/O port)
  Digital thermometer DS1820 for measuring temperature from -55ºC to 125ºC.(use DuPont wire can be connected to the arbitrary I/O port)(remarkㄩ chip DS18B20 is optional).
  Program or Debug connector Port for  每 to directly connect ICD2/MCD2/ICD3/
PICKIT2 for the board target chip program or debug
  8 LEDs are provided. 每 t(use DuPont wire can be connected to the arbitrary I/O port)
  PS2 connector makes direct connection between QLdsPIC3 and PC keyboard.
  User Target chip socket
  16*2-character LCD每internal 5*7 lattices, to display 16*2-character.(use DuPont wire can be connected to the arbitrary I/O port)
128*64- Graphic LCD每128*64 lattices.(use DuPont wire can be connected to the arbitrary I/O port)
Preprogrammed dsPIC30F6014A Plug-in Module, VDD =5V, Crystal for 10Mhz, On each corner of the card there is one electrolytic capacitor for stable power supply..
Preprogrammed PIC24FJ96GA008 Plug-in Module, VDD =3.3V,Please set VDD jump for 3.3V, Crystal for 10Mhz, On each corner of the card there is one electrolytic capacitor for stable power supply.(remarkㄩPIC24FJ96GA008 Chip Module is optional, Price is $24.90).
  Preprogrammed dsPIC33FJ128GP708 Plug-in Module, VDD =3.3V,Please set VDD jump for 3.3V, Crystal for 10Mhz, On each corner of the card there is one electrolytic capacitor for stable power supply.(remarkㄩdsPIC33FJ128GP708 Chip Module is optional, Price is $24.90).

Characteristicsㄩ

  • Open modular designㄩ All modules can be on/off controlled by DIP switch. Each module is designed to connect to I/O port of Microcontroller. Connection of module with any port of Microcontroller is conveniently achieved through dupont thread. Connection to preset port is available by using DIP switch without dupont thread. All I/O ports are open externally with output socket. Expansion is easily accomplished.

  • On-board simulation debugging and Programmer interfaceㄩ direct connection to ICD2/ICD3/MCD2/PICKIT2
  • The master controller is in independent design and it*s easy to change.

Board Resource Introduction:

1) Power supply module, Jump select VDD for 5V or 3.3V                       
2) Master controller chip module
3) ICSP Connect port,it  can connect icd2/icd3/mcd2/pickit2 for program or debug,                      
4) Master controller chip ICSP I/O Pin select.
5) Reset key-press                       
6) LED module
7) Key-press module              
8) A/D converter input module
9) DS18B20 digital thermometer module                       
10) Real time clock module by PCF8583
11)
16*2-character LCD
12) 16*2 LCD backlight potentiometer
13)
128*64- Graphic LCD
14) 128*64 LCD backlight potentiometert
15) SD/MMC card Read/Write Module
16) PS2 module
17) CAN bus module by mcp2551
18) RS232 module B
19) RS232 module A
20)
RS-485 and RS-422 communication module by MAX489E
21) Ethernet module by ENC28J60
22)
Si3000 Voiceband Codec with MIC In/Speaker Jacks
23) All pins are taken out on IDC10 connectors to make them available for further connections.


Sample with C30 Program sources code as below (using dsPIC30F6014):

  • 8x LED
  • RS232 Communication
  • RS485 Communication
  • Can Communication
  • PS2
  • Real time clock
  • Si3000 Voiceband Codec
  • DS1820
  • MMC\SD card Read/Write
  • 128x64 GLCD
  • 1602 LCD
  • Key-press
  • A/D converter

Related Downloads:

  Standard configurationㄩ

Product Serial No.ㄩ Q23    Weight:0.9kg

PriceㄩUS $150.00 (not include shipping)

The auction includes
  1. QLdsPIC3 DEVELOPMENT Board (Include one dsPIC30F6014A chip module,one 16*2 LCD,one 128*64 LCD)
  2. RJ45 LAN Cable
  3. RJ12 to RJ12 ICSP cable
  4. Dupont thread expansion connection 20x wire
  5. DC wall adapter(input: AC110-240V 50/60Hz, output: DC9V 1000mA)
  6. CD-ROM (English version PDF User manual ,PCB Board Layout PDF,Schematic PDF , Sample code (C30) , MPLAB  IDE, Chip's Datasheet)
Product Serial No.ㄩQ24 =Q23(dsPIC3 DEVELOPMENT BOARD)+M06(ICD2 in circuit debugger)    PriceㄩUS $228.00(not include shipping)   Weight:1.8kg 

Optional parts:

  • DS18B20 ( DS1820 ) Temperature Sensor(TO-92 package)  US$3.00 for each
  • 12864-character LCD Module Yellow Backlight   Each additional US$14.00
  • 1602 LCD with Yellow backlight  (have include in package) Each additional US$4.00
  • 1.0GB SanDISK SD Card   US$10.00 for each
  • dsPIC30F6014A Chip Module Each additional US$24.90 
  • PIC24FJ96GA008 Chip Module US$24.90 for each
  • dsPIC33FJ128GP708 Chip Module US$24.90 for each

      Worldwide shipping by DHL/UPS/TNT/FedEx/EMS... Express $30.00 for Q23---- (about 3-7 days)

      Worldwide shipping by DHL/UPS/TNT/FedEx/EMS... Express $40.00 for Q24---- (about 3-7 days)

      Purchasing Instructions:
      At the time of purchase, please indicate the following:

      Contact telephone number for shipping purposes

FAQ
Hi, if we buy now, when you shipped to me ?
  • When we received you payment, we will sent the items to you within 1-2 work days !
you sent the items to me ,you have the tracking number for me ?
  • We will send you by DHL/UPS/FedEX/TNT/EMS..Express, This is  have provide Tracking number! and it can takes  3-7 working days !
If the item in the swap in the transport stolen, and you will be re-distributed to us?
  • If you buy the parts, within the prescribed time did not receive goods, we will re-sent to you.
  • For example,  if you buy the parts on jaunary 1, you will received the parts on Jaunary 15 before, becuase it takes 3-7 working days, if you not received the parts on Jaunary 15 before, please tell me we, we will re-sent to you!
  • We WON'T resend any bounce back order due to incorrect shipping address
payment method
  • Accept paypal
    Credit card through Paypal
  • Accept Pay to bank of chian
  • Accept wester union
    I will ship to the shown address on you PAYPAL Payment notice.
    Please confirm your shipping address in the PayPal Account
    or Please tell me your shipping address by Email,
    Please tell me you phone number
    Buyers need to absorb ALL re-shipments fee of returned packages
Return Policy
  • 100% money back guarantee or exchange the same class of the products.
    Full refund will be issued upon receipt of the Deffective Item.
    Please be advised that shipping and handling cost are not refundable.
    Buyers must be returned the defective products within 7 days from the date when product received.
    Refund or Replacement will be sent after we received your returning item.
    In all cases, buyers pay shipping at their own cost to return products for exchange or refund.
Shipping Schedule
  • Normally, Your order will be shipped within 1-2 our business days after the payment is cleared.
    The shipping time may vary, depends on receiver's location.
Item Declare
  • Your item will mark as Gift or Sample and a low's value.
    We are NOT responsible for any import tax, customs fees or customs delay.
    Buyer cannot request to cancel the auction or request for refund under this situation. Please check with your local tax authorities BEFORE bidding.
    However, most of our items can reach to buyers without any taxes.

Payment methods 1: Direct remittance to PAYPAL
 

QLdsPIC3 Development board(Q23)+shipping by DHL/UPS/TNT/FedEx Express  US $180.00   
Q24=QLdsPIC3(Q23)+ICD2(M06)+shipping by DHL/UPS/TNT/FedEx Express  US $268.00   
 Each additional  dsPIC30F6014A Chip module  Increase US$24.90  
Increase PIC24FJ96GA008 Chip module    Increase US$24.90  
Increase dsPIC33FJ128GP708 Chip module    Increase US$24.90   
Increase 1.0GB SanDISK SD Card   Increase US$10.00   
Increase DS18B20 ( DS1820 ) Temperature Sensor(TO-92 package)   Increase US$3.00   
Each additional  128*64-character LCD Module Yellow Backlight     Increase US$14.00  
Each additional 1602 LCD with Yellow backlight   Increase US$4.00   
Method 2:You can go directly to our EBAY purchased online stores, and its Web site is: http://stores.ebay.com/QLS-Microchip-pic-mcu-mpu-tools

Method 3: BANK OF CHINA International Business:

Remittance form:Remittance to our BANK OF CHINA account use U.S.dollars through local banks.
Remittances cost:General remittances will be fixed at 25 dollars deducted, the total amount of remittances:The total amount of products + Shipping+ USD $25.00.
The message witch provide to the local bank's:(To avoid making mistakes,You can put the following message to the bank staff,and ask he fill the forms for you )
A/C NO: 4766938-0188-129144-0      IN A/C WITH: TANG YAN 
BENE&S BANK: BANK OF CHINA SHENZHEN BEI FANG BUILDING SUB-BRANCH
SWIFT CODE: BKCHCNBJ45A      ADD: 1/F,BEI FANG BUILDING,SHEN NAN ZHONG ROAD,SHENZHEN,CHINA 
POST CODE: 518033
E-MAIL: cxqmcu@tom.com cxqmcu@cxqmcu.com   MSN: cxqmcu@tom.com
Method 4:  Wester Union
You can select the nearest agency for westernunion, you only need my name, city and country to send money. They accept cash and online payment .After you send it, the workers of westernunion will give you a control number, i need this control number and your full name to draw money.

With more than 150 years of experience, Western Union is a global leader in money transfer services. It helps consumers and businesses send money quickly and reliably,only take 5 minutes to arrive.you can visit www.westernunion.com for more details.Also it is easy to find a close agent from this link: http://www.westernunion.com/info/selectCountry.asp and please click Find An Agent .

Here is my westernunion info:
firstname:   Yan
familyname:   Tang
Address:   Huiningge 13G,qianlong garden,Longhua,ShenZhen,Guangdong,China
city:   ShenZhen
State:   Guangdong
country:   China


Note:
After payment,please e-mail us The Sender's First Name, Last Name, Total Amount, Money Control Transfer Number and address on the payment sheet, so that we can track and get the payment.

SHEN ZHEN QLS ELECTRONIC TECHNOLOGY CO.,LTD.

ADD:Huiningge 13G,qianlong garden,Longhua,SHENZHEN,GUANGDONG P.R.CHINA
Postalcode: 518131  TEL:0755-28187975    FAX:0755-28187976
E-Mail: cxqmcu@cxqmcu.com